SAPHIR offers a complete range of Silage Removal Attachments to streamline your equipment and work flow.
Every machine is the product of rigorous, programmed quality controls managed directly by SAPHIR’s engineering team, guaranteeing high product quality, measurable outcomes, and full compliance with all relevant certifications and standards. A variety of Adapt Attachments are manufactured for tractors, wheel and telescopic loaders. The SAPHIR silage removal/cutting buckets are suitable for the removal and transport of all types of silage. The closed bucket floor enables the loading of loose feed components and minimises crumbling losses when removing maize silage. The side counter cuts on the back ensure a clean cut without material jamming. The innovative retensioning device allows the gap between the top clamp and the back section to be optimally adjusted. Another unique selling point is the double-walled design of the upper clamp. This guarantees a uniform cutting pattern without lateral twisting. Optimise your operation, deliverables; and use of time with SAPHIR equipment.
Download the SAPHIR Product Catalogue for all details on your preferred product options.
For breaking down high silage stacks.
The SAPHIR silage comb SK is the ideal implement for breaking down silage from particularly high silage stacks. The adjustable foregrip ensures particularly adaptable and optimised work. The ability to safely cut silage at a height protects both the user and the machine.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page190
For breaking down high silage stacks.
The SAPHIR silage comb SK Heavy Duty is the ideal implement for breaking down silage from particularly high silage stacks. The adjustable foregrip ensures particularly adaptable and optimised work. The ability to safely cut silage at a height protects both the user and the machine.The SAPHIR extension can be universally combined with our grain push plates and silage combs.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page190
Silage cutting tongs. Suitable for all types of silage.
The SAPHIR SSZ silage cutting tongs are suitable for the removal and transport of all types of silage. The counter blades positioned on the right and left of the back section ensure a clean cut without the risk of material jamming. The innovative re-tensioning device allows the gap between the top clamp and the base unit to be adjusted to minimise material jamming. The back of the silage cutting tongs is closed with an expanded metal mesh. This enables a particularly good view. Another unique selling point of the SAPHIR silage cutting tongs is the double-walled upper tong design. This guarantees an optimum cutting pattern without lateral distortion.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page182
Silage cutting tongs. Suitable for all types of silage.
The SAPHIR SSZ XL silage clamps are suitable for removing and transporting all types of silage. A special feature of the XL series is the very large capacity and the large opening width of the top clamp of approx. 1300 mm.The counter blades on the right and left of the back section ensure a clean cut without the risk of material jamming. The innovative re-tensioning device allows the gap between the top clamp and the base unit to be adjusted, minimising material jamming. The back of the silage cutting tongs is closed with an expanded metal mesh. This enables a particularly good view. Another unique feature of the SAPHIR silage cutting tongs is the double-walled upper tong design. The particularly large over bite (approx. 160 mm) guarantees a clean cut without tearing.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 184
Suitable for all types of silage. No lateral twist design.
The SAPHIR SSE silage cutting buckets are suitable for the removal and transport of all types of silage. The closed bucket floor enables the loading of loose feed components and minimises crumbling losses when removing maize silage. The side counter cuts on the back ensure a clean cut without material jamming. The innovative retensioning device allows the gap between the top clamp and the back section to be optimally adjusted. Another unique selling point is the double-walled design of the upper clamp. This guarantees a uniform cutting pattern without lateral twisting. The counter blades positioned on the right and left of the back section ensure a clean cut without the risk of material jamming.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 188
Push-Off wall increases the discharge height.
The hydraulic push-off wall for the SAPHIR silage clamps enables the silage block to be deposited by simply pushing it out. In addition, the push-off wall can increase the discharge height of the feed mixer wagon. This special equipment is only available as original equipment ex works. An additional double-acting control unit is required (+ 1x dw).
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page186
Silage and compost stacking and removal.
The SAPHIR grab bucket GS is a universally applicable grabbing tool for the agricultural sector. The main area of application is the removal of silage from the silage stack. The tine version of the upper pliers with forged quality tines ensures a clean cutting edge. In the sickle version, the hardened sickles ensure that no load is impaled during manure removal or loading of compost etc... The appliances can also be supplied for wall removal as an option. Available with Tines.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 148
Silage and compost stacking and removal.
The SAPHIR grab bucket GS is a universally applicable grabbing tool for the agricultural sector. The main area of application is the removal of silage from the silage stack. The tine version of the upper pliers with forged quality tines ensures a clean cutting edge. In the sickle Version, the hardened sickles ensure that no load is impaled during manure removal or Loading of compost, etc. The appliances can also be supplied for wall removal as an option.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 141
Silage and compost stacking and removal.
The SAPHIR grab bucket GS L is a universally applicable grabbing tool for the agricultural sector. The L stands for an increased volume compared to the standard grab bucket. The main area of application for this grab bucket is the removal of silage from the silage stack. The tine version of the upper pliers with forged quality tines ensures a clean cutting edge. In the sickle version, the hardened sickles ensure that no load is impaled during manure removal or loading of compost, etc. A wall removal function is optionally available ex works. Available with Tines.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 150
Silage and compost stacking and removal.
The SAPHIR grab bucket XL is a universally applicable grab tool for the agricultural sector. The XL stands for a further increase in volume compared to the L grab bucket. The main area of application for this grab bucket is silage removal from the silage stockpile. The tine version of the upper pliers with forged quality tines ensures a clean cutting edge. In the sickle version, the hardened sickles ensure that no load is impaled during manure removal or loading of compost, etc. A wall removal function is optionally available. Available with Tines.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 152
For wheeled loaders. Silage and compost stacking and removal.
The SAPHIR grab bucket GSR is a universally applicable Grabbing tool for the gricultural sector. The R stands for the special use on wheel loaders with operating weights of over 10 tonnes. The construction is designed to meet the highest requirements and offers even larger loading volumes compared to the XL grab bucket. The areas of application are diverse and range from the typical silage removal at the silage stockpile to mucking out stables and loading compost, for example. The carrier vehicle mount is shown as standard using the Variable Lock System and can be changed using the 8 locking pins. All appliances are equipped with an adjustable pressure relief valve ex works. Available with Tines.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 154
